“For years I searched for a product that makes foiling lures fast and easy. I really wanted a cheap, effective solution that anyone could use. I finally found one…..
Holoscale is so good – I just had to share it with other lure makers!“
Holoscale is an awesome, super stretchy, self adhesive holographic foil. Use it to quickly and easily create dazzling rainbow sparkle and flash on custom lures or to spice up off-the-shelf lures. Trust me, the intensity of the flash and color can’t be done justice with photographs!
Advantages Of Holoscale
- Fast, easy application. Stretches without tearing and conforms to lure shape – even very small lures
- Self adhesive. No messing about with spray adhesive
- Tough and durable. Beats the thin foil tapes!
- Clear coat over. Doesn’t turn gray or lose brilliance when protected by clear coat.
Forget the fiddly and and frustrating foil tapes! Holoscale is by far the easiest way to get holographic finishes on handmade lures. It’s durable, self adhesive and can be applied to wooden or plastic lure bodies, spoons, blades and other lure styles. Holoscale is thin and stretchy enough to get around the curves and complex details of even the smallest lures without tearing. The textured underside channels out trapped air, giving strong adhesion and a smooth, professional result.
Holoscale won’t turn dull gray when you clear coat, but retains brilliant flash and rainbow color. Perfect for painting over with transparent colors!
Why Is Flash Important To Lure Makers?
Fish (and humans) can see flash from a long, long way off – Much further than they can see color. Think about a time when you were on the water and spotted a glint of sunlight flashing from the windscreen of a distant boat. You wouldn’t even know that boat was there except for that unmistakable flash of light.
Beneath the water surface baitfish scales are the main source of flash. So flash will usually attract attention. Game fish are hard wired to investigate and when they do they’re expecting a feed.
Why Has Chroming Lures Always Been Such A Hassle?
Until now there has been no easy solution. “Chrome” aerosol paints look great right up until you clear coat your lure, then they turn an ugly matte gray (yuck). Two part polyurethane paints overcome this, but they’re usually quite toxic and aren’t recommended for recreational lure makers. The “Chroming” kits on the market usually require a complex, multi-step process and are quite expensive unless you’re turning out a lot of lures.
So recreational lure makers have reverted to foiling their lure bodies, which can give a decent result, but is fiddly and laborious. Still, many of us (myself included) persist because the results are worth it.
That’s why I’m so excited about Holoscale. It’s non toxic, cheap, easy to use and looks fantastic.
How To Apply Holoscale
1. Clean the lure with isopropyl or denatured alcohol.
2. Cut a piece of foil and remove the backing paper.
3. Lay the Holoscale on top of the lure, or place it on a flat surface with the adhesive-side up and place your lure on top.
4. Using the ball of your thumb, work the foil from the center of the lure, smoothing out wrinkles as you go.
5. Use a hair dryer or other gentle heat source to warm the Holoscale in areas where there are tight curves or detail to cover.
6. Trim away the excess and run a smooth, hard object (eg the back of a knife or the smooth part of a drill bit) over the surface to smooth everything down and remove any bubbles
7. Your lure can be painted at this point. However, I find that a coat of epoxy before painting helps to mask the edges of the foil.
8. Paint, then coat with your favorite clear coat.
9. Go fishing!
Q: Do I have to clear coat over Holoscale?
A: The adhesive is waterproof and strong and the Holoscale itself is also pretty durable, so you can get away without clear coating if you choose, especially if it’s not wrapped around a tight curve. You’ll find that Holoscale can be removed when it gets damaged or dull and you can replace it with a fresh piece. That said, I personally always clear coat over my Holoscale finishes.
Q: Does Holoscale work over the scales of molded plastic lures?
A: Holoscale stretches beautifully over large detail such as fins, gills and eye sockets. It also works well over hand carved scales on wooden lures. The scales on molded plastic lures are not as strongly defined, so they get obscured a little but they’re still visible and extremely attractive under Holoscale.
Q: What about the blades on wire baits etc? Can Holoscale work on them?
A: Yes. But again, clear coat is recommended.
Q: Can Holoscale be textured in the same way as other foils?
A: No. If a textured foil finish is what you’re after then Holoscale is not the right product. However, if you are happy to texture your wooden lure body then the film will show up the detail just fine, just like textured foils. Or, you can airbrush scales after applying the foil.
Q: What are the shipping times?
A: Within Australia and the US product normally ships within 24 hrs and delivery is 3-4 days.
For customers outside of the USA and Australia, product usually ships within 24-48 hrs. Delivery times vary depending on your country and there are budget and tracked delivery options shipping available. Please note that budget shipping is at your own risk. I provide evidence that the parcel has been posted, but I am unable to assist or replace orders that go missing in the mail unless you have selected the tracked option.